Site Overlay

Category: How to connect biometric device to database

Thursday, February 25, FingerTec 67 Comments. In fact, the administrator finger print is not being recognized to access the new device. How can I access my new device? Also is it really possible to copy finger prints from one TA plus terminal to another? Error : IPbio" What this error means???? Dear Sukhwinder, Referring to the problem, we suspect the device is hang or in idle mode.

Please restart the device or turn Off the power supply and check whether it can solve the problem. If not, please contact and liaise with your local reseller for further assistance as we need a well-trained Fingertec technician on site to execute the tools and check the hardware part before advising further. If you don't know who is your re seller, please kindly provide us the serial number of the terminal in order for us to check and get your local reseller to assist you at the soonest.

Hello Ishwor Khatiwada, Referring to the problem, please provide to us the error picture and device serial number then send to support fingertec. In the mean time, please update us if you have updated the device with any firmware or not before this error appears. I can change IP address device from Dear Sir, Good day to you, If you're using Ingressus, please refer the details below Remark: Please make sure your PC is using the same network range which network [ If your PC is using different network range [for example: Dear Sir, May I know which software that you're using?

Once it successfully downloaded, kindly check in the Data Audit List whether you can find all the downloaded data in the software or not. Dear support, I would like to replace our current 30 time clocks with TA plus. The current 30 time clocks are in different VLAN department.

Orange octagon pill m

By default, looks like ta only reply to the pc on the same subnet. Thank you.

Deploying Biometrics: The Database Aspect

Hi Andy Tsai, Good day to you. Dear Sir, Good day to you. The password should be based on what you have set from your MySQL installation. Then click on Test Connection button. After that, proceed to Step 2 and 3. Hello every one! I have issue with the access of attendance machine through public ip set to the device while accessing through web.In any business or corporation, change is always a must. Whether it is for strategic or operative reasons, to flourish, change must always be embraced.

Every day, we keep hearing of major Cyberthreats, which in hindsight, had the potential to be avoided in the first place. The latter two dealt the massive threat of credit card numbers as well as usernames and passwords.

In this regard, change is a must for organizations all over the world, on a minute by minute basis. In fact, this can be likened to that of a cat and mouse game, where the business or corporation is the mouse, and the Cyberattacker is the cat.

After all, their reputations are on the line as well, as they will be the first to get blamed if a Cybersecurity breach were actually to occur. Our last three articles have reviewed in great detail as well as provided a step by step process as to what it will take for a C-Level Executive to fully procure, deploy, and implement a Biometrics Security system at their respective business.

how to connect biometric device to database

Simple installations are of course easy enough, but if the planned deployment is going to be a large one, then a complete Biometric Project Management plan is necessary. In fact, one of the main goals of these articles has been to provide this necessary framework. Our last one examined these four areas of the Biometric Project Management Plan:. This can be considered the blueprint for the entire Biometrics deployment and installation both from a hardware and software perspective.

Storage and Matching: This aspect covers how the raw images which are collected will be converted over into their respective Enrollment and Verification Templates. The Operational Architecture Design: This part examines how Biometrics can work in a Multimodal approach from within a legacy security system at the business or corporation. The Information Processing Architecture: This area reviews the mathematical algorithms which are needed to convert the raw images into the Biometric Templates and the how the Enrollment and Verification Templates will be with against one another.

how to connect biometric device to database

Subsystem Analysis and Design: This part details as to what the exact sub-components of the entire Biometric System are. This article continues with the theme of Biometric Project Management-focusing in on the database aspect of it. This is often the most forgotten about a component in Biometrics, as well as the most vulnerable to Cyber based attacks and threats.

The database of a Biometric system is unique in that it houses both the Enrollment and Verification Templates of the end user population.

Although it is typically not done, even the raw images can be stored as well if this is done, one of the main priorities is to notify the employees of the business or corporation of this, and the reasons why it is being stored. These databases can be housed in the particular modality itself, or at the server level if a Client-server network topology is utilized. How the database will be used depends primarily upon two factors:. Typically these databases are very simple, and have already been installed and configured by the vendors themselves.

Dmcc contact number

In most cases, it is the larger corporations and businesses which will utilize the Client server network approach. Some of the reasons for this include much more sophisticated Security needs, and other office locations dispersed in other geographic regions. In these instances, the Biometric devices are all networked together, and linked up to a central server s. The databases are typically housed here, because of the sheer volume and the complexity of the Biometric Templates and the associated transactions which are taking place.

For instance, it is not just the Templates from one modality which is being transmitted and contained in the repository, the Templates of other modalities are also being stored as well for example both Fingerprint Recognition and Iris Recognitionthus increasing the complexity and structure of the Biometrics database.Odoo is the world's easiest all-in-one management software.

It includes hundreds of business apps:. Our company has a Biometric FingerPrint Machine and at the end of day, we have an excel sheet which contains all the attendance records of the Employees. We import this excel sheet into openERP.

But is there anyway that whenever a Employee uses their fingerprint-reader, then the record is added in openERP or database. Then we will not have to import excel sheets one by one daily.

But I don't think this is provided? Hmm I'm pretty sure you could write a bash script for this or using an Odoo scheduler. I'd suggest you to open a new question for this where you ask how to run a scheduler to import external files. You can write to sales[at]camsunit. Smart Way Business Solutions has released a new module that allows you to integrate your biometric device with Odoo 11 community and enterprise!

Don't waste any more time or effort! Check out the module here! The answer is yes however you may be required to do some programming depending on the version of Odoo you are using I put together a comprehensive list of fingerprint solutions currently available for Odoo.

Ue4 stylized water

Hi Stephen Mack I can download this two module from the git hub and make some changes in the code. After that I can installed successfully in odoo 8 version.

But I want to know further steps and ,How to configure and connected to a finger print reader. Thanks in advance. Use the live chat to ask your questions. The operator answers within a few minutes. Dismiss Odoo is the world's easiest all-in-one management software. Edit Close Delete Flag. Unsubscribe Subscribe Thanks for your subscription!

Android 10 proximity sensor not working

Comment Share. Post comment Discard.

how to connect biometric device to database

Delete Convert as a answer. Please let me know if any one knows the solution for it. Yenthe Van Ginneken Oocademy. Timothy Verellen. Adnan Bayoun. Gaurav Sahu. Manish Kumar Bohra.

how to connect biometric device to database

Stephen Mack. Watch now.ATTendee Time and Attendance lets you control how your employees clock in and out hourly — all of which are easy to use and integrate automatically with payroll. Installation throughout your work locations is easy to make it convenient for employees to clock in and out at the start of their day, for lunch and other scheduled breaks.

School Management System for best administration of school management. School Management Software for best administration of school management. Important: Complete features can be unlocked in PRO version. Website: www. Description School Management System for best administration of school management. Do you have a GitHub project? Now you can sync your releases automatically with SourceForge and take advantage of both platforms.

It can be used in the institutes ranging from coaching institute to school. ICE Hrm is a Human resource management system for small and medium sized organizations. The system is implemented with a modular architecture which makes it extendable and customizable easily.

Ovicetime is a fingerprint based attendance system designed for offices, organizations and work places in general. This edition is worked on by the OS4ED core development team and is also open to the public.

Can be used for any type of registration that requires payment, such as events, membership, etc. Calibre has the ability to view, convert, edit, and catalog e-books of almost any e-book format.

A classroom bio-metric attendance systemit aims at solving the intricacies of the conventional attendance system. It is best school management software also known as school erp available for all type of schools.

It have features as listed below: 1. Responsive Design. White Label 3. Admin, Student, Staff and Parent Panels 4 types 4. School setup 5.Administrators use a desktop fingerprint sensor to read user fingerprints See the bottom right side of Figure 8 - 1 and send them with measured accuracies to the Oracle Biometric Authentication Service, which stores them in the Biometric Authentication Server, an Oracle database repository. The measured accuracy of a fingerprint is an estimate of how reliable a comparison can be made between the stored fingerprint and the user's fingerprint that is entered later for authentication.

How do I connect or enable biometric device that is detected on my Windows 7 laptop?

These same administrators also define a security policy for each database server that accepts biometrically identified users.

The security policy is enforced for all clients serviced by that database server. It contains a secret key and three types of threshold levels for fingerprints: verification, false finger, and high security. At the client, before any authentication can occur, the administrator not shown stores the secret key in the fingerprint sensor for each client. The secret key stored in the fingerprint sensor will be compared against the secret key stored in the security policy.

At the client, in response to the user's request for authentication, the Biometric Authentication Service stores the three threshold levels in the client's fingerprint sensor and uses them to evaluate the user-entered fingerprint for authentication: the verification threshold defines the accuracy required of a fingerprint before it will be accepted for authentication the false finger threshold helps reject false fingers the high security threshold helps check for materials from which false fingers are made For more detailed information on the threshold levels, please refer to the Identix documentation.

At the client, the Oracle Biometric Authentication Service fulfills the request for authentication by "reading" the user's fingerprint, the threshold values, and the secret key from the sensor and creating a hash from them. This hash is then compared with the hash constructed from the repository's copy of the secret key, threshold, and stored fingerprint in order to determine whether this user may access the system.

Figure 8 - 1. In the remainder of this document, the Oracle Biometric Manager will also be referred to as the manager. The Oracle Biometric Authentication Server, which stores the security policies and fingerprints, is a specially configured version of a production Oracle Database Server. In the remainder of this document, the Oracle Biometric Authentication Server will also be referred to as the authentication server. The Oracle Biometric Authentication Adapters not shown are used on both the clients and the database servers to help communicate biometric authentication data between the authentication server and the clients.

In the remainder of this document, the Oracle Biometric Authentication Adapter will also be referred to as the adapter. Please refer to Identix documentation for a description of these Identix products. Administration Architecture Administrators use the manager to scan user fingerprints, measure the accuracy of the fingerprints, and establish security policies for database servers. The manager sends this information to the authentication server, which stores the data in the repository.

Gdal convert to png

This key must match the key stored in the security policy before authentication can occur. Figure 8 - 2 shows that administrators enter fingerprints and security policies into the Oracle Biometric Manager, which stores them in the Oracle Biometric Authentication Server.

Figure 8 - 2. The client-side adapter sends an authentication request to the server-side adapter, which then forwards the request on to the authentication server.

For each authentication request from a client, the authentication server retrieves and sends the user's fingerprint and the database server's security policy back to the client-side adapter via the server-side adapter.

Figure 8 - 3. Authentication Procedures The user's authentication request causes the Biometric Authentication Adapter client-side to send the request to the Biometric Authentication Adapter server-sidewhich sends the request to the Oracle Biometric Authentication Server, which returns the stored fingerprint and the associated security policy.

The adapters on the client and the database server work together to compare the user's fingerprint, the secret key, and the threshold levels against the administrator-entered security policy stored in the authentication server repository. If this data matches, then the user is authenticated. Prerequisites The server-side adapter and the authentication server can reside on separate nodes as demonstrated in Figure 8 - 3or they can both reside on the same node. The authentication server and each database server must be running Oracle7 Server Version 7.

Install the Identix hardware and the Identix driver firmware and configure the Identix variables and devices. See the Identix documentation for instructions. Please see your platform-specific installation documentation.Effective with the next release 8. Overview The Biometric Authentication Service uses Identix Biometric Authentication to provide tamper-proof biometric authentication of users using secret-key MD5 hashing, centralized management of biometrically identified users, and centralized management of those database servers that authenticate biometrically identified users.

This section describes how the Biometric Authentication Service works in a client-server environment. The Fingerprint Repository has an administrator who is responsible for enrolling multiple user fingerprint templates, and defining the default policy for all databases that subscribe to the fingerprint server for authentication. The Fingerprint Security Service Administrator uses a desktop fingerprint scanner to read user fingerprints, convert them into fingerprint templates, and send them with measured accuracies to the Biometric Authentication Service.

The Biometric Authentication Service stores the fingerprint templates in the Fingerprint Repository, an Oracle database. The measured accuracy of a fingerprint is an estimate of how reliable a comparison can be made between the stored fingerprint template and the user's fingerprint that is scanned later for authentication. The enrollment quality is expressed as a percent score between 0 and For example, a user may have an enrollment quality of 72 percent.

32 acp ammoseek

At the client, before any authentication can occur, the Fingerprint Security Service Administrator stores the secret key in the fingerprint sensor for each client.

The secret key stored in the fingerprint sensor is compared against the secret key stored in the security policy. At the client, in response to a user authentication request, the database server enforces on the client the set of values that it obtains from the default security policy in its fingerprint server. The user fingerprint is scanned and the verification result, fingerprint template, secret key, and threshold values are used to generate a hash total.

The hash total is sent to the server-side adapter for comparison with the hash total generated by the server-side adapter.

Both the manager and the client-side adapter interface with the following Identix products:. The manager sends this information to the authentication server, which stores the data in the repository.

The client-side adapter sends an authentication request to the server-side adapter which uses the previously enrolled fingerprint stored in the authentication server for comparison.

For each authentication request from a client, the authentication server retrieves and sends the user's fingerprint and the database server's security policy back to the client-side adapter via the server-side adapter.

The user's authentication request causes the client-side Oracle Advanced Security Identix authentication adapter to send the request to the server side biometric authentication adapter. The adapter looks up the user's fingerprint in the authentication server, which returns the stored fingerprint and the associated security policy.I have 1 pc unit with one network port.

I have 2 network devices with different ip's. What I want to achieve is to connect both devices without plugging and unplugging the network cable.

The electronic store provides me with a RG45 splitter. I connected the RG45 splitter to the pc, then both cables are attached to the splitter. I tried giving both devices with the same ip first does not work.

Then different ip's, but it doesn't work still.

Deploying Biometrics: The Database Aspect

The devices are: 1. The payroll system software works with both cables attached with different ip'sbut the biometric system software produces a connection error. Can you just plug scanner into the switch that the pc-unit is plugged into. If it is an IP device, it should be seen just fine. I do this with signature capture cards. You can't just split a network cable the same way you can an analog phone line.

If the scanner is a network device it has to plug into a switch or at least a hub. If the PC is the only computer that uses the scanner you might even be able to install another network cable and use a crossover cable. Have you read the instructions for installing the scanner to see what connections it supports? You need to let us understand more detail about your connection. Are you joining devices in an existing network or new network? But from what you said, there are many ways to join devices to the network.

From your statement I will suggest you use a particular ip series to connect them to the switch. So give the devices like If all can be in similar series. The set up right now is that there is an existing network wherein the pc is connected to the server. But the user have to unplug the network server cable from the pc so that she can plug the cable of the biometric scanner not connected to the network but only to that pc. I was hoping for a solution using the RG45 splitter thinking I might have neglected a setting of the devices the switches and scanner.

But i will try to run a long cable from the scanner to the switch. If there someone also who have tried using an RG45 splitter, I'll be very glad to know when it can be used. You can not use a splitter, it has to be a hub or switch. In your case you could add a network card to your pc. Splitting a network connection!? This requires a switch. Once IP addresses are received they should be accessible for use. If I have this correct you need 2 Ethernet outlets in a location where you only have one, regardless of what gets connected to them, PC, Network Scanner Biometric, etc.

You could add a small switch at the location, or if you can't add a switch, the Splitter works by taking 1,2,3,and 6 and separating for one connection, then 4,5,7,and 8 for 2nd connection. You connect 2 leader cables to the splitter and connect both to splitter?. Understand the splitter only "splits" the existing cable you have using 1,2,3,6 for one switch connection and 4,5,7,8 for one connection.


thoughts on “How to connect biometric device to database

Leave a Reply

Your email address will not be published. Required fields are marked *